Response of a scale-model pile group for a jacket foundation of an offshore wind turbine in liquefiable ground during shaking table tests     

Yung-Yen Ko  Yi-Ting Li 《地震工程与结构动力学》2020,49(15):1682-1701

To investigate the seismic response of a pile group during liquefaction, shaking table tests on a 1/25 scale model of a 2 × 2 pile group were conducted, which were pilot tests of a test project of a scale-model offshore wind turbine with jacket foundation. A large laminar shear box was utilized as the soil container to prepare a liquefiable sandy ground specimen. The pile group model comprising four slender aluminum piles with their pile heads connected by a rigid frame was designed with similitude considerations focusing on soil–pile interaction. The input motions were 2-Hz sinusoids with various acceleration amplitudes. The excess pore water pressure generation indicated that the upper half of the ground specimen reached initial liquefaction under the 50-gal-amplitude excitation, whereas in the 75-gal-amplitude test, almost entire ground was liquefied. Accelerations in soil, on the movable frames composing the laminar boundary of the shear box, and along the pile showed limited difference at the same elevation before liquefaction. After liquefaction, the soil and the movable-frame accelerations that represented the ground response considerably reduced, whereas both the movable frames and the piles exhibited high-frequency jitters other than 2-Hz sinusoid, and meantime, remarkable phase difference between the responses of the pile group and the ground was observed, all probably due to the substantial degradation of liquefied soil. Axial strains along the pile implied its double-curvature bending behavior, and the accordingly calculated moment declined significantly after liquefaction. These observations demonstrated the interaction between soil and piles during liquefaction.  相似文献   

Constitutive modelling of fine-grained gassy soil: A composite approach     

Zhiwei Gao  Yi Hong  Lizhong Wang 《国际地质力学数值与分析法杂志》2020,44(9):1350-1368

Fine-grained marine sediments containing large undissolved gas bubbles are widely distributed around the world. Presence of the bubbles could degrade the undrained shear strength (s_u ) of the soil, when the gas pressure u_g is relatively high as compared with the effective stress in the saturated soil matrix. Meanwhile, the addition of bubbles may also increase s_u when the difference between u_g and pore water pressure u_w becomes smaller than the water entry value, causing partial water drainage from the saturated matrix into the bubbles (bubble flooding) during globally undrained shearing. A new constitutive model for describing the two competing effects on the stress-strain relationship of fine-grained gassy soil is proposed within the framework of critical state soil mechanics. The gassy soil is considered as a three-phase composite material with compressible cavities, which allows water entry from the saturated matrix. Bubble flooding is modelled by introducing an additional positive volumetric strain increment of the saturated clay matrix, which is dependent on the difference between pore gas and pore water pressure based on experimental observations. A modified hardening law based on that of the modified Cam clay model is employed, which in conjunction with the expression for bubble flooding, can describe both the detrimental and beneficial effects of gas bubbles on soil strength and plastic hardening in shear. Only two extra parameters in addition to those in the modified Cam clay model are used. It is shown that the key features of the stress-strain relationship of three fine-grained gassy soils can be reproduced satisfactorily.  相似文献   

场地类别分类方案研究     

陈国兴  丁杰发  方怡  彭艳菊  李小军 《岩土力学》2020,41(11):3509-3522

基于性能的抗震设计，要求工程师设计出具有预期抗震性能的结构，一个关键因素是地震作用的确定，这在很大程度上取决于局部场地条件。通过收集和分析北京、苏州和唐山城区956个钻孔资料，建立地表20 m和30 m深土层走时平均剪切波速VS20和VS30的关系式；现场钻探获取北京城区深105 m的典型钻孔原状土样，试验给出各类土体动剪切模量和阻尼比曲线；建立北京城区170个钻孔的场地反应计算模型，采用Nakamura提出的HVSR法和陈国兴等提出的弱震法估算场地基本周期TS值，结合国内外现行抗震规范的场地分类及一些学者对场地分类的研究成果，提出两种新的场地分类建议方案：基于等效剪切波速VSE和覆盖土层厚度H（地表至剪切波速VS ≥ 500 m/s的基岩深度）的双指标场地分类方案及基于VSE、H和TS的三指标场地分类方案。提出的场地分类方案对我国现行抗震规范场地分类方法的改进有参考价值。  相似文献   

基于剪切波速的深层砂土地震液化研究     

王薇  李恒  徐利军 《大地测量与地球动力学》2019,39(1):93-97

阐述了剪切波速法判别饱和砂土液化的原理，结合武汉地区某工程实例，对场地内埋深超越“规范法”适用范围的砂层进行液化判别，确定场地的临界液化深度。通过与室内动三轴试验的对比得出，2种方法的液化判别结果及确定的临界液化深度均吻合较好，验证了以剪切波速为指标的液化评估方法的可行性。  相似文献   

扩孔螺栓连接型消能梁段的力学模型及参数研究          下载免费PDF全文

张波  胡淑军  熊进刚  王雪飞  曾思智 《世界地震工程》2019,35(3):073-82

当前国家对建筑结构的抗震性能和震后功能恢复能力提出了更高要求。基于短剪切型消能梁段的受剪屈服特性和剪切扩孔型螺栓连接的受剪滑移性能，提出一种新型扩孔螺栓连接型消能梁段，可有效增大消能梁段的延性和耗能能力并同时减小消能梁段的损伤，使带扩孔螺栓连接型消能梁段的新型Y形偏心支撑结构更好地适应当前要求。采用有限元方法详细分析扩孔螺栓连接型消能梁段的滞回性能、破坏模式和耗能机理，由此得到其骨架曲线和力学模型，并阐述其力学模型的影响参数，为相应偏心支撑结构的设计和分析提供理论依据。  相似文献   

铜川新区黄土与古土壤动剪切模量比和阻尼比的统计研究          下载免费PDF全文

段蕊  陈党民 《世界地震工程》2019,35(3):153-160

利用铜川市地震小区划项目的大量典型土样动三轴试验结果，采用双曲线模型拟合得到了铜川新区黄土和古土壤在8个典型应变下的动剪切模量比和阻尼比值。根据不同沉积年代和不同土层深度2种方法对黄土、古土壤动剪切模量比和阻尼比随剪应变变化情况进行了统计和对比分析。研究发现:同一剪应变下，黄土、古土壤动剪切模量比随沉积年代和土层深度的增加而增加。二者对黄土动剪切模量比的影响较为显著。  相似文献   

Strength matters: Resisting erosion across upland landscapes     

Arjun M. Heimsath  Kelin X. Whipple 《地球表面变化过程与地形》2019,44(9):1748-1754

Soil-covered upland landscapes comprise a critical part of the habitable world and our understanding of their evolution as a function of different climatic, tectonic, and geologic regimes is important across a wide range of disciplines. Soil production and transport play essential roles in controlling the spatial variation of soil depth and therefore hillslope hydrological processes, distribution of vegetation, and soil biological activity. Field-based confirmation of the hypothesized relationship between soil thickness and soil production is relatively recent, however, and here we quantify a direct, material strength-based influence on variable soil production across landscapes. We report clear empirical linkages between the shear strength of the parent material (its erodibility) and the overlying soil thickness. Specifically, we use a cone penetrometer and a shear vane to determine saprolite resistance to shear. We find that saprolite shear strength increases systematically with overlying soil thickness across three very different field sites where we previously quantified soil production rates. At these sites, soil production rates, determined from in situ produced beryllium-10 (¹⁰Be) and aluminum-26 (²⁶Al), decrease with overlying soil thickness and we therefore infer that the efficiency of soil production must decrease with increasing parent material shear strength. We use our field-based data to help explain the linkages between biogenic processes, chemical weathering, hillslope hydrology, and the evolution of the Earth's surface. © 2019 John Wiley & Sons, Ltd.  相似文献   

The strain‐dependent spatial evolution of garnet in a high‐P ductile shear zone from the Western Gneiss Region (Norway): a synchrotron X‐ray microtomography study          下载免费PDF全文

A. Macente  F. Fusseis  L. Menegon  X. Xiao  T. John 《Journal of Metamorphic Geology》2017,35(5):565-583

Reaction and deformation microfabrics provide key information to understand the thermodynamic and kinetic controls of tectono‐metamorphic processes, however, they are usually analysed in two dimensions, omitting important information regarding the third spatial dimension. We applied synchrotron‐based X‐ray microtomography to document the evolution of a pristine olivine gabbro into a deformed omphacite–garnet eclogite in four dimensions, where the 4^th dimension is represented by the degree of strain. In the investigated samples, which cover a strain gradient into a shear zone from the Western Gneiss Region (Norway), we focused on the spatial transformation of garnet coronas into elongated garnet clusters with increasing strain. The microtomographic data allowed quantification of garnet volume, shape and spatial arrangement evolution with increasing strain. The microtomographic observations were combined with light microscope and backscatter electron images as well as electron microprobe (EMPA) and electron backscatter diffraction (EBSD) analysis to correlate mineral composition and orientation data with the X‐ray absorption signal of the same mineral grains. With increasing deformation, the garnet volume almost triples. In the low‐strain domain, garnet grains form a well interconnected large garnet aggregate that develops throughout the entire sample. We also observed that garnet coronas in the gabbros never completely encapsulate olivine grains. In the most highly deformed eclogites, the oblate shapes of garnet clusters reflect a deformational origin of the microfabrics. We interpret the aligned garnet aggregates to direct synkinematic fluid flow, and consequently influence the transport of dissolved chemical components. EBSD analyses reveal that garnet shows a near‐random crystal preferred orientation that testifies no evidence for crystal plasticity. There is, however evidence for minor fracturing, neo‐nucleation and overgrowth. Microprobe chemical analysis revealed that garnet compositions progressively equilibrate to eclogite facies, becoming more almandine‐rich. We interpret these observations as pointing to a mechanical disintegration of the garnet coronas during strain localization, and their rearrangement into individual garnet clusters through a combination of garnet coalescence and overgrowth while the rock was deforming.  相似文献   

Basin‐scale methods for predicting salmonid spawning habitat via grain size and riffle spacing,tested in a California coastal drainage          下载免费PDF全文

Allison M. Pfeiffer  Noah J. Finnegan 《地球表面变化过程与地形》2017,42(6):941-955

Basin‐scale predictive geomorphic models for river characteristics, particularly grain size, can aid in salmonid habitat identification. However, these basin‐scale methods are largely untested with actual habitat usage data. Here, we develop and test an approach for predicting grain size distributions from high resolution LiDAR (Light Detection and Ranging)‐derived topographic data for a 77 km² watershed along the central California Coast. This approach improves on previous efforts in that it predicts the full grain size distribution and incorporates an empirically calibrated shear stress partitioning factor. The predicted grain size distributions are used to calculate the fraction of the bed area movable by spawning fish. We then compare the ‘movable fraction’ with 7 years of observed spawning data. We find that predicted movable fraction explains the paucity of spawning in the upper reaches of the study drainage, but does not explain variation along the mainstem. In search of another morphologic characteristic that may help explain the variation within the mainstem, we measure riffle density, a proxy for physical habitat complexity. We find that field surveys of riffle density explain 64% of the variation in spawning in these mainstem reaches, suggesting that within reaches of appropriate sized gravel, spawning density is related to riffle density. Because riffle density varies systematically with channel width, predicting riffle spacing is straightforward with LiDAR data. Taken together, these findings demonstrate the efficacy of basin‐scale spawning habitat predictions made using high‐resolution digital elevation models. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Evaluating a process‐based model for use in streambank stabilization: insights on the Bank Stability and Toe Erosion Model (BSTEM)          下载免费PDF全文

Kate Klavon  Garey Fox  Lucie Guertault  Eddy Langendoen  Holly Enlow  Ron Miller  Anish Khanal 《地球表面变化过程与地形》2017,42(1):191-213

Streambank retreat is a complex cyclical process involving subaerial processes, fluvial erosion, seepage erosion, and geotechnical failures and is driven by several soil properties that themselves are temporally and spatially variable. Therefore, it can be extremely challenging to predict and model the erosion and consequent retreat of streambanks. However, modeling streambank retreat has many important applications, including the design and assessment of mitigation strategies for stream revitalization and stabilization. In order to highlight the current complexities of modeling streambank retreat and to suggest future research areas, this paper reviewed one of the most comprehensive streambank retreat models available, the Bank Stability and Toe Erosion Model (BSTEM), which has recently been integrated with several popular hydrodynamic and sediment transport models including the Hydrologic Engineering Center's River Analysis System (HEC‐RAS). The objectives of this paper were to: (i) comprehensively review studies that have utilized BSTEM and report their findings, (ii) address the limitations of the model so that it can be applied appropriately in its current form, and (iii) suggest directions of research that will help make the model a more useful tool in future applications. The paper includes an extensive overview of peer reviewed studies to guide future users of BSTEM. The review demonstrated that the model needs further testing and evaluation outside of the central United States. Also, further development is needed in terms of accounting for spatial and temporal variability in geotechnical and fluvial erodibility parameters, incorporating subaerial processes, and accounting for the influence of riparian vegetation on streambank pore‐water pressure dynamics, applied shear stress, and erodibility parameters. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献